HTS 8465 · Canada · duty record
Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials
Product description (continued): Goods in HTS heading 8465 from Canada pay the general duty in the tariff schedule plus Section 301 10%. Across the 78 lines below the percentage total runs from 12.4% to 13%. Section 232 is added to the totals only where a plain percentage applies to the line and the country (conditional and country-deal rates are listed, not added), we found no IEEPA duty in force, and antidumping duties are not checked here.
Selected line / duty components
General schedule rate: 2.4%
Used or rebuilt › Tenoners
Click any code in the table below to show that line here.
Duty by line
78 tariff lines · CanadaPick your own 10-digit code from your classification or broker: the rate that applies to you is the one on your line. The last column is the percentage part only, on $10,000 of customs value.
78 lines shown
| Code | Product | General rate | Added duties | Total percentage | On $10,000 |
|---|---|---|---|---|---|
| Used or rebuilt › Tenoners | 2.4% | 10% Section 301 · adds | 12.4% | $1,240.00 | |
| Used or rebuilt › Other | 2.4% | 10% Section 301 · adds | 12.4% | $1,240.00 | |
| Machines which can carry out different types of machining operations without tool change between such operations › Numerically controlled | 2.4% | 10% Section 301 · adds | 12.4% | $1,240.00 | |
| Machines which can carry out different types of machining operations without tool change between such operations › Other | 2.4% | 10% Section 301 · adds | 12.4% | $1,240.00 | |
| Other › Other | 2.4% | 10% Section 301 · adds | 12.4% | $1,240.00 | |
| Machines which can carry out different types of machining operations without tool change between such operations › Other | 2.4% | 10% Section 301 · adds | 12.4% | $1,240.00 | |
| Machining centers › For sawing, planing, milling, molding, grinding, sanding, polishing, drilling or mortising | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Machining centers › For bending or assembling | 2.9% | 10% Section 301 · adds | 12.9% | $1,290.00 | |
| Machining centers › Other | 2.4% | 10% Section 301 · adds | 12.4% | $1,240.00 | |
| Used or rebuilt › Rip saws | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Used or rebuilt › Panel saws | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Used or rebuilt › Band saws | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Used or rebuilt › Cross-cut and optimizing saws | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Used or rebuilt › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Other › Sawmill machines | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Sawing machines › Radial arm saws | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Sawing machines › Tilting arbor table saws | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Sawing machines › Rip saws | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Sawing machines › Miter saws | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Sawing machines › Scroll saws | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Sawing machines › Valued under $3,000 each | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Sawing machines › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Sawing machines › Valued under $1,000 each | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Sawing machines › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Sawing machines › Cross-cut and optimizing saws | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Sawing machines › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Sawing machines › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Used or rebuilt › Moulders | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Used or rebuilt › Routers | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Used or rebuilt › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Planing, milling or molding (by cutting) machines › Valued under $3,000 each | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Planing, milling or molding (by cutting) machines › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Other › Moulders | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Planing, milling or molding (by cutting) machines › Valued under $1,000 each | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Planing, milling or molding (by cutting) machines › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Planing, milling or molding (by cutting) machines › Valued under $1,000 each | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Planing, milling or molding (by cutting) machines › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Planing, milling or molding (by cutting) machines › Valued under $3,000 each | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Planing, milling or molding (by cutting) machines › Numerically controlled | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Planing, milling or molding (by cutting) machines › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Planing, milling or molding (by cutting) machines › Valued under $1,000 each | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Planing, milling or molding (by cutting) machines › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Other › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Planing, milling or molding (by cutting) machines › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Used or rebuilt › Belt sanders, for a belt width 60 cm or wider | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Used or rebuilt › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Grinding, sanding or polishing machines › Valued under $1,000 each | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Grinding, sanding or polishing machines › Valued $1,000 or over but under $3,000 each | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Grinding, sanding or polishing machines › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Other › Belt sanders, for a belt width 60 cm or wider | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Other › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Grinding, sanding or polishing machines › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| For woodworking › Used or rebuilt | 2.9% | 10% Section 301 · adds | 12.9% | $1,290.00 | |
| Bending or assembling machines › Doweling machines | 2.9% | 10% Section 301 · adds | 12.9% | $1,290.00 | |
| Bending or assembling machines › Edgebanding machines | 2.9% | 10% Section 301 · adds | 12.9% | $1,290.00 | |
| Bending or assembling machines › Laminating machines | 2.9% | 10% Section 301 · adds | 12.9% | $1,290.00 | |
| Bending or assembling machines › Cold | 2.9% | 10% Section 301 · adds | 12.9% | $1,290.00 | |
| Bending or assembling machines › Other | 2.9% | 10% Section 301 · adds | 12.9% | $1,290.00 | |
| Bending or assembling machines › Other | 2.9% | 10% Section 301 · adds | 12.9% | $1,290.00 | |
| Bending or assembling machines › Other | 2.9% | 10% Section 301 · adds | 12.9% | $1,290.00 | |
| Used or rebuilt › Numerically controlled boring machines | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Used or rebuilt › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Drilling or mortising machines › Numerically controlled | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Drilling or mortising machines › Valued under $3,000 each | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Drilling or mortising machines › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Drilling or mortising machines › Valued under $1,000 each | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Drilling or mortising machines › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Other › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| Drilling or mortising machines › Other | 3% | 10% Section 301 · adds | 13% | $1,300.00 | |
| For woodworking › Log splitters | 2.4% | 10% Section 301 · adds | 12.4% | $1,240.00 | |
| For woodworking › Chippers | 2.4% | 10% Section 301 · adds | 12.4% | $1,240.00 | |
| For woodworking › Hogs | 2.4% | 10% Section 301 · adds | 12.4% | $1,240.00 | |
| For woodworking › Other | 2.4% | 10% Section 301 · adds | 12.4% | $1,240.00 | |
| Splitting, slicing or paring machines › Other | 2.4% | 10% Section 301 · adds | 12.4% | $1,240.00 | |
| Woodworking machines › Debarkers | 2.4% | 10% Section 301 · adds | 12.4% | $1,240.00 | |
| Woodworking machines › Lathes | 2.4% | 10% Section 301 · adds | 12.4% | $1,240.00 | |
| Woodworking machines › Other | 2.4% | 10% Section 301 · adds | 12.4% | $1,240.00 | |
| Other › Other | 2.4% | 10% Section 301 · adds | 12.4% | $1,240.00 |
What is and is not counted
Rules applied to Canada
- 10% Section 301 since 2026-07-24 — source (9903.05.20-9903.05.84 (headings by country))
2026 Section 301 action (91 FR 47318, U.S. note 52): 10% on top of the general rate, from 24 July 2026, for the countries named in headings 9903.05.22, 9903.05.26, 9903.05.28, 9903.05.29, 9903.05.35, 9903.05.37, 9903.05.40, 9903.05.42, 9903.05.44, 9903.05.45, 9903.05.50, 9903.05.54, 9903.05.55, 9903.05.62, 9903.05.72, 9903.05.78, 9903.05.81. Not charged on goods the note exempts (agricultural list, civil aircraft, pharmaceuticals, and every product on a Section 232 list); other exemptions (Canada and Mexico goods that enter free under USMCA, CAFTA-DR textiles, country-specific lists) are not modelled.
Section 232: what the proclamations say about chapter 84
These are summaries of the official proclamations. Where the tariff schedule notes give a plain percentage for your line and country, it is already in the duty above (see the layer list). Rates that depend on a fact only you know (the share of metal by weight, U.S.-made metal, a country deal, a USMCA claim) are listed but not added. Check your own line against the official list or ask your broker.
Semiconductors (certain advanced chips) in force
- Federal Register document 2026-01052 (published 2026-01-20). USITC HTS 2026HTSRev23, U.S. note 39 and headings 9903.79.01 to 9903.79.09. +25% (heading 9903.79.01) on semiconductor articles of 8471.50, 8471.80 and 8473.30 that are a logic integrated circuit, or contain one, within two stated performance ranges (note 39(b)). Other products in those codes pay nothing extra (9903.79.02); so do chips for U.S. data centers, repairs, research, start-ups, consumer electronics, civil industrial use and public-sector use (9903.79.03 to .09). The schedule does not list heading 8542 chips.
- Product list (added 2026-11-21): 3 code prefixes parsed from note 39(b). The performance ranges and uses cannot be read from the product code, so the row is listed and not added to totals.
Read from the proclamation on 2026-11-21. Sources: Federal Register document 2026-01052
Pending and recent notices for this heading
None of the notices we track names heading 8465 and Canada together. Many notices name only a program or a chapter, so also read all pending notices.